Inhalation by breathing solvent vapors. These lists are organized into three categories: The F-list (non-specific source wastes). Hazardous Solvents List. Project 112/SHAD. (ii) If 1,2-phenylenediamine is present in the wastes, the generator can use either knowledge or sampling and analysis procedures to determine the level of this constituent in the wastes. (b) Listing Specific Definitions: [Comment: Unless the residue is being beneficially used or reused, or legitimately recycled or reclaimed; or being accumulated, stored, transported or treated prior to such use, re-use, recycling or reclamation, EPA considers the residue to be intended for discard, and thus, a hazardous waste. [45 FR 33119, May 19, 1980, as amended at 48 FR 14294, Apr. Gulf War Illnesses Afghanistan. Many classes of chemicals are used as organic solvents, including aliphatic hydrocarbons, aromatic hydrocarbons, amines, esters, ethers, ketones, and nitrated or chlorinated hydrocarbons. We use solvents practically every day in our lives. Auto allowance and adaptive equipment. that the terms of the exclusion were met, Wastewater treatment sludges from the production of vinyl chloride monomer using mercuric chloride catalyst in an acetylene-based process, Nonwastewaters from the production of dyes and/or pigments (including nonwastewaters commingled at the point of generation with nonwastewaters from other processes) that, at the point of generation, contain mass loadings of any of the constituents identified in, Brine purification muds from the mercury cell process in chlorine production, where separately prepurified brine is not used, Chlorinated hydrocarbon waste from the purification step of the diaphragm cell process using graphite anodes in chlorine production, Wastewater treatment sludge from the mercury cell process in chlorine production, Baghouse filters from the production of antimony oxide, including filters from the production of intermediates (e.g., antimony metal or crude antimony oxide), Slag from the production of antimony oxide that is speculatively accumulated or disposed, including slag from the production of intermediates (e.g., antimony metal or crude antimony oxide), Residues from manufacturing and manufacturing-site storage of ferric chloride from acids formed during the production of titanium dioxide using the chloride-ilmenite process, By-product salts generated in the production of MSMA and cacodylic acid, Wastewater treatment sludge from the production of chlordane, Wastewater and scrub water from the chlorination of cyclopentadiene in the production of chlordane, Filter solids from the filtration of hexachlorocyclopentadiene in the production of chlordane, Wastewater treatment sludges generated in the production of creosote, Still bottoms from toluene reclamation distillation in the production of disulfoton, Wastewater treatment sludges from the production of disulfoton, Wastewater from the washing and stripping of phorate production, Filter cake from the filtration of diethylphosphorodithioic acid in the production of phorate, Wastewater treatment sludge from the production of phorate, Wastewater treatment sludge from the production of toxaphene, Heavy ends or distillation residues from the distillation of tetrachlorobenzene in the production of 2,4,5-T, 2,6-Dichlorophenol waste from the production of 2,4-D, Vacuum stripper discharge from the chlordane chlorinator in the production of chlordane, Untreated process wastewater from the production of toxaphene, Untreated wastewater from the production of 2,4-D, Process wastewater (including supernates, filtrates, and washwaters) from the production of ethylenebisdithiocarbamic acid and its salt, Reactor vent scrubber water from the production of ethylenebisdithiocarbamic acid and its salts, Filtration, evaporation, and centrifugation solids from the production of ethylenebisdithiocarbamic acid and its salts, Baghouse dust and floor sweepings in milling and packaging operations from the production or formulation of ethylenebisdithiocarbamic acid and its salts, Wastewater from the reactor and spent sulfuric acid from the acid dryer from the production of methyl bromide, Spent absorbent and wastewater separator solids from the production of methyl bromide, Wastewater treatment sludges from the manufacturing and processing of explosives, Spent carbon from the treatment of wastewater containing explosives, Wastewater treatment sludges from the manufacturing, formulation and loading of lead-based initiating compounds, Dissolved air flotation (DAF) float from the petroleum refining industry, Slop oil emulsion solids from the petroleum refining industry, Heat exchanger bundle cleaning sludge from the petroleum refining industry, API separator sludge from the petroleum refining industry, Tank bottoms (leaded) from the petroleum refining industry, Crude oil storage tank sediment from petroleum refining operations, Clarified slurry oil tank sediment and/or in-line filter/separation solids from petroleum refining operations, Spent Hydrotreating catalyst from petroleum refining operations, including guard beds used to desulfurize feeds to other catalytic reactors (this listing does not include inert support media), Spent Hydrorefining catalyst from petroleum refining operations, including guard beds used to desulfurize feeds to other catalytic reactors (this listing does not include inert support media), Emission control dust/sludge from the primary production of steel in electric furnaces, Spent pickle liquor generated by steel finishing operations of facilities within the iron and steel industry (SIC Codes 331 and 332), Spent potliners from primary aluminum reduction, Emission control dust/sludge from secondary lead smelting. with (3aS-cis)-1,2,3,3a,8,8a-hexahydro-1,3a,8-trimethylpyrrolo[2,3-b]indol-5-yl methylcarbamate ester (1:1). Microsoft Edge, Google Chrome, Mozilla Firefox, or Safari. See the 'Cross Reference' blocks in the text of this content for more information. If testing is reinstated, a description of the process change must be retained. (i) Document that previous equipment cleaning and/or replacement was performed in accordance with this section and occurred after cessation of use of chlorophenolic preservatives. The Electronic Code of Federal Regulations (eCFR) is a continuously updated online version of the CFR. with (3aS-cis)-1,2,3,3a,8,8a-hexahydro-1,3a,8-trimethylpyrrolo[2,3-b]indol-5-yl methylcarbamate ester (1:1), Carbamic acid, [(dibutylamino)-thio]methyl-, 2,3-dihydro-2,2-dimethyl-7-benzofuranyl ester, Carbamic acid, methyl-, 3-methylphenyl ester, Carbamic acid, dimethyl-, 1-[(dimethyl-amino)carbonyl]-5-methyl-1H-pyrazol-3-yl ester, Carbamic acid, dimethyl-, 3-methyl-1-(1-methylethyl)-1H-pyrazol-5-yl ester, Ethanimidthioic acid, 2-(dimethylamino)-N-[[(methylamino) carbonyl]oxy]-2-oxo-, methyl ester, Methanimidamide, N,N-dimethyl-N-[3-[[(methylamino)-carbonyl]oxy]phenyl]-monohydrochloride, Phenol, 3-methyl-5-(1-methylethyl)-, methyl carbamate, Phenol, 3-(1-methylethyl)-, methyl carbamate, Propanal, 2-methyl-2-(methyl-sulfonyl)-, O-[(methylamino)carbonyl] oxime, Pyrrolo[2,3-b]indol-5-ol, 1,2,3,3a,8,8a-hexahydro-1,3a,8-trimethyl-, methylcarbamate (ester), (3aS-cis)-, Acetic acid, (2,4-dichlorophenoxy)-, salts & esters, Azirino[2,3:3,4]pyrrolo[1,2-a]indole-4,7-dione, 6-amino-8-[[(aminocarbonyl)oxy]methyl]-1,1a,2,8,8a,8b-hexahydro-8a-methoxy-5-methyl-, [1aS-(1aalpha, 8beta,8aalpha,8balpha)]-, Benz[j]aceanthrylene, 1,2-dihydro-3-methyl-, Benzamide, 3,5-dichloro-N-(1,1-dimethyl-2-propynyl)-, Benzenamine, 4,4-carbonimidoylbis[N,N-dimethyl-, Benzenamine, 4-chloro-2-methyl-, hydrochloride, Benzeneacetic acid, 4-chloro-alpha-(4-chlorophenyl)-alpha-hydroxy-, ethyl ester, Benzenebutanoic acid, 4-[bis(2-chloroethyl)amino]-, 1,2-Benzenedicarboxylic acid, bis(2-ethylhexyl) ester, 1,2-Benzenedicarboxylic acid, dibutyl ester, 1,2-Benzenedicarboxylic acid, diethyl ester, 1,2-Benzenedicarboxylic acid, dimethyl ester, 1,2-Benzenedicarboxylic acid, dioctyl ester, Benzene, 1,1-(2,2-dichloroethylidene)bis[4-chloro-, Benzene, 1,1-(2,2,2-trichloroethylidene)bis[4-chloro-, Benzene, 1,1-(2,2,2-trichloroethylidene)bis[4- methoxy-. *(I,T) should be used to specify mixtures that are ignitable and contain toxic constituents. (1) For the purposes of the K181 listing, dyes and/or pigments production is defined to include manufacture of the following product classes: dyes, pigments, or FDA certified colors that are classified as azo, triarylmethane, perylene or anthraquinone classes. (C) The calculations performed to determine annual total mass loadings for each K181 constituent in the nonwastewaters during the year. Petroleum-based solvents are the most common type used in industry. removed from the list of hazardous air pollutants in December 2005, removed from the list of hazardous air pollutants (glycol ethers category) in November 2004, removed from the list of hazardous air pollutants in June 1996, removed from the list of hazardous air pollutants in August 2000, Benzene (including benzene from gasoline), Cresols/Cresylic acid (isomers and mixture), Dichloroethyl ether (Bis(2-chloroethyl)ether), Epichlorohydrin (l-Chloro-2,3-epoxypropane), Ethylidene dichloride (1,1-Dichloroethane), Methyl chloroform (1,1,1-Trichloroethane), Propylene dichloride (1,2-Dichloropropane), Vinylidene chloride (1,1-Dichloroethylene), Arsenic Compounds (inorganic including arsine). For practical purposes, a solvent is simply a liquid capable of dissolving specific solids or liquids. Laboratories or other areas generating more than 5 gallons of hazardous waste (spent solvents) per month should accumulate the waste in safety cans. Choosing an item from F-list | 2 EPA Waste Code Hazardous waste Hazard code more of those solvents listed in F001, F002, F004, and F005; and still bottoms from the recovery of these spent solvents and spent solvent mixtures. If the wastes are determined to be hazardous and the generator has not complied with the subtitle C requirements during the interim period, the generator could be subject to an enforcement action for improper management. Learn more. F020, F021, F022, F023, F026, and F027. (a) Any commercial chemical product, or manufacturing chemical intermediate having the generic name listed in paragraph (e) or (f) of this section. Carbamic acid, methyl-, 3-methylphenyl ester. [Comment: For the convenience of the regulated community the primary hazardous properties of these materials have been indicated by the letters T (Toxicity), and R (Reactivity). (c) K181 Listing Levels. Hazardous wastes may also include many items that you would not normally think of as being hazardous, such as: 29, 1990; 75 FR 13002, Mar. will bring you directly to the content. (d) Any residue or contaminated soil, water or other debris resulting from the cleanup of a spill into or on any land or water of any commercial chemical product or manufacturing chemical intermediate having the generic name listed in paragraph (e) or (f) of this section, or any residue or contaminated soil, water or other debris resulting from the cleanup of a spill, into or on any land or water, of any off-specification chemical product and manufacturing chemical intermediate which, if it met specifications, would have the generic name listed in paragraph (e) or (f) of this section. You are using an unsupported browser. Share sensitive information only on official, secure websites. Phenol, 3-(1-methylethyl)-, methyl carbamate. As you know, there are solvents that we use daily that are hazardous. Copyright OSHA Safety Manuals | All Rights Reserved, Lockout Tagout Remember to Lockout and Tagout, Portable Light Strings Electrical Safety, Electrical Hazards High Voltage Electrical Burns, Chemical Hazards Hazardous Materials Identification System, IIPP Injury and Illness Prevention Program.
Realtor Com Lakes Of Mount Dora,
Concerts In Boise Idaho 2023,
Articles H
